Understanding Temperature SettingsUpdated 3 hours ago
Your Arctic Warriors chiller allows you to set and maintain a specific water temperature using the control panel or the mobile app. Understanding how temperature settings work helps you achieve consistent cooling, avoid confusion, and use the system efficiently. This guide explains how temperature control works and what to expect during operation.
1. Current Water Temperature vs Target Temperature
There are two temperature values shown on the screen or app.
- Current Water Temperature
This shows the real time temperature of the water exiting the chiller. - Target Temperature
This is the temperature you want the water to reach.
The chiller will continue cooling until the current temperature reaches the target temperature.
2. How to Adjust the Target Temperature
You can adjust the target temperature using
- the control panel buttons, Touch Panel or
- the mobile app slider
To adjust
- increase or decrease the temperature gradually
- allow time for the system to respond
- avoid rapid large changes
Temperature changes take time, especially with larger tubs or warm starting water.
3. Temperature Adjustment Using the App
In the app
- drag the white dot left or right to set the target temperature
- the setting updates instantly
- the chiller begins cooling automatically if needed
The app shows both the current temperature and the target temperature for easy monitoring.
4. Temperature Adjustment Using the Control Panel
On the control panel
- press the up or down buttons
- confirm the target temperature on the display
- the chiller activates cooling mode automatically
Both the app and the control panel control the same system. Changes made in one will reflect in the other.
5. Understanding Cooling Behavior
The chiller does not cool instantly.
Cooling speed depends on
- tub size
- starting water temperature
- ambient temperature
- airflow around the chiller
- water flow strength
Larger tubs and warmer environments require more time to reach lower temperatures.
6. Minimum Temperature Limits
Your chiller has a minimum temperature limit to protect the system.
- The lowest setting is approximately 3°C (37°F)
- The system may prevent further cooling below this point
- This protects internal components from freezing
Attempting to set the temperature lower than the limit will not force additional cooling.
7. Temperature Units (Fahrenheit and Celsius)
You can switch between temperature units in the app or settings menu.
To change units
- open the settings page
- select temperature type
- choose Fahrenheit or Celsius
This does not affect performance, only how values are displayed.
8. Why the Chiller May Pause Cooling
The chiller may temporarily stop cooling if
- the target temperature is reached
- water flow is weak
- ventilation is insufficient
- the system needs to protect itself
Once conditions stabilize, cooling will resume automatically.
9. Expect Normal Temperature Fluctuations
Small temperature changes are normal.
You may notice
- slight increases when the lid is opened
- minor fluctuations during use
- gradual cooling rather than instant drops
This is normal behavior and does not indicate a problem.
10. Tips for Better Temperature Control
For the best results
- keep the lid closed when not in use
- maintain clean filters
- ensure strong water flow
- place the chiller in a cool, ventilated area
- avoid direct sunlight on the tub
These steps help the system maintain stable temperatures.
When to Contact Support
Contact our support team if
- the temperature does not change at all
- the display does not respond to adjustments
- the chiller cools but stops far above the target
- the temperature reading appears inaccurate
We are here to help.
Email: [email protected]
Phone: (386) 388-6867
Summary
Understanding temperature settings helps you get the most from your cold plunge. The chiller cools based on a target temperature, adjusts gradually, and operates within safe limits. Proper airflow, clean filters, and patience are key to consistent performance.