Ice Bath Chiller Installation GuideUpdated 6 hours ago

Getting your chiller set up is quick and easy. Follow these steps to install it properly and start enjoying your ice baths!

Click here to watch the installation video.

 What You’ll Need:

• Ice bath tub

• Chiller unit

• Access to a grounded power outlet

• Hoses and clamps (included)

• Teflon Tape

  Step-by-Step Installation:

1. Unbox Your Chiller
   Carefully remove all packaging and inspect your chiller for any shipping damage.

2. Place the Chiller
   Set the unit on a level, stable surface close to your tub and a power outlet.

3. Connect the Hoses

   • Attach one hose from the chiller's water out port to the tub’s inlet.

   • Attach the second hose from the water in port on the chiller to the tub’s outlet.

   • Tighten clamps securely to prevent leaks.

4. Fill the Tub
   Fill your tub with clean water up to the recommended level.

5. Plug in the Chiller
   Connect the unit to a grounded power outlet.

6. Power On and Test
   Turn on the chiller and check the water flow. Adjust hose connections if needed to eliminate leaks.

7. Installation Complete!
   Once running smoothly, you're ready to chill!

  Tips:

• Always check for leaks before starting a full cooling session.

• Make sure hoses are not kinked or bent, as this can restrict water flow.

• Refer to this video to connect your unit to the App right after setup!