How to Use Filters ProperlyUpdated 15 hours ago

Your filter plays a critical role in keeping your cold plunge water clean, clear, and circulating correctly. Improper filter use is one of the most common causes of cloudy water, flow errors, and cooling issues. This guide explains how to install, maintain, and replace your filter to ensure optimal performance.

1. Install the Filter Correctly

Before turning on your chiller, make sure the filter is installed properly.

Check that

• the filter is fully seated in the housing
• the filter is straight and not tilted
• the housing cap or cover is securely closed
• there are no gaps or loose fittings

An improperly seated filter can restrict water flow and cause errors.

2. Keep the Filter Clean

Filters trap debris, hair, oils, and particles from the water. Over time, this buildup reduces flow.

To maintain proper filtration

• rinse the filter regularly using clean water
• remove visible debris from the pleats
• avoid using soap or chemicals when rinsing

A dirty filter is the most common cause of low flow and cooling issues.

3. Rinse the Filter on a Regular Schedule

Filter cleaning frequency depends on usage.

Recommended rinsing schedule

• every 3 to 7 days for regular use
• more often for outdoor setups
• more often if multiple users share the tub

If water flow feels weaker than usual, rinse the filter immediately.

4. Replace the Filter When Needed

Rinsing alone is not enough over time.

Replace the filter if

• the pleats remain dark after rinsing
• water flow stays weak
• the filter material feels stiff or compacted
• the filter has been in use for several weeks
• cloudiness returns quickly after cleaning

A worn filter cannot trap debris effectively.

5. Always Run the Chiller With a Filter Installed

Never operate the chiller without a filter.

Running the system without a filter can

• allow debris into the pump
• damage internal components
• reduce cooling efficiency
• void protection against preventable damage

Always install a clean filter before starting the system.

6. Check the Filter Housing Area

Debris can collect around the intake even if the filter is clean.

During maintenance

• remove the filter
• wipe the housing area
• remove hair or debris near the intake
• ensure the seal is clean

A clean housing supports strong water flow.

7. Monitor Water Flow After Maintenance

After installing or cleaning the filter

• restart the chiller
• observe water circulation
• confirm steady and strong flow
• watch for flow errors

Good circulation confirms the filter is working correctly.

8. Adjust Filter Care Based on Usage

Increase filter care if

• the tub is used daily
• the tub is outdoors
• users do not rinse before plunging
• water shows early signs of cloudiness

Heavy use requires more frequent filter maintenance.

9. Store Spare Filters Properly

Keep replacement filters

• dry
• sealed
• away from direct sunlight
• free from moisture or dust

Proper storage ensures filters are ready when needed.

When to Contact Support

Contact our support team if

• flow errors continue after replacing the filter
• circulation remains weak
• the filter housing will not seal correctly
• you are unsure which filter to use

We are happy to help.

Email: [email protected]
Phone: (386) 388-6867

Summary

Proper filter use includes

• correct installation
• regular rinsing
• timely replacement
• keeping the housing clean
• never running the system without a filter

Maintaining your filter properly helps keep your water clear, your chiller protected, and your cold plunge performing at its best.